Engine Mount w/4″ Footprint – 5/8″ Stud – 80-230lbs Capacity Per Mount
The R & D Marine Engine Mounts are designed specifically for the rigors of marine applications. The mounts are stiff enough to absorb forward and reverse propeller thrust, yet soft enough to isolate drivetrain vibrations from the hull.
To help increase the longevity of the mounts, all steel parts are zinc plated and pasivated to limit corrosion. The rubber component is covered by an oil shield to protect it from petroleum based products.
R & D Marine mounts are preloaded based on the combined engine and transmission weight to limit engine movement. To facilitate in the ease of installation the mounts are height adjusting and the mounting holes in the base of the mount are slotted to assist in alignment of the drivetrain.
How To Select (details required):
1.Define the total weight of the engine and the transmission.
2.Determine 60% of the total weight and then divide by 2 to determine the capacity of each of the rear mounts (the mounts on the tranmission side of the engine).
3.Determine 40% of the total weight and then divide by 2 to determine the capacity of each of the front mounts (the mounts opposite the tranmission side of the engine).
4.Determine the stud necessary stud diameter and footprint of the mount.
5.Choose mount most appropriately sized for the per mount weight. When possible, choose the mount nearest the middle of the weight range.
Example:
Engine weight is 480lbs., transmission weight is 110lbs., footprint is 4″, stud diameter is 5/8″.
Total weight is 590lbs.
590 x .6 / 2 = 177 lbs per rear mount. Mounts required are 800-010
590 x .4 / 2 = 118 lbs per rear mount. Mounts required are 800-037
Why R&D Marine Engine Mounts?
- Designed for marine use, accepts propeller and engine thrust in both directions
- Offers a fail safe design
- R & D Marine Mounts are height adjustable
- Pre-loaded to reduce movement
- Slotted holes in base to assist in alignment
- Mount types to fit all applications
Quick Guide (pdf)
Brochure (pdf)
Professionally packed and fast shipping
Through our long-term relationship with UPS, FedEx, DHL and many other top global carriers we are able to offer various shipping options. Our warehouse staff is extremely skilled and will package your products according to our exact and precise specifications. Your items are carefully inspected and properly secured before shipping. We ship to thousands customers every day across multiple countries. This shows our commitment to be the largest online retailer on the planet. We have distribution centers and warehouses in Europe and the USA.
It is important to note that orders with more than one item are processed according to the specific item.
We will thoroughly inspect all items before sending. Most orders are shipped within 48 hours. The time to deliver varies from 3-7 days.
Returns
The stock is dynamic and we do not fully manage it because of the fact that many parties are involved, including our warehouse and factory. The actual stock can change at any moment. It's possible that the inventory could run out once your order has been processed.
Our policy runs for a period of 30 days. We cannot replace or refund your purchase after 30 days since the purchase.
The item cannot be in use and must be in the original packaging. It should also be in the original package.
Related products
Battery Isolators
Analytic Systems 2-Bank Battery Isolator, 200A, 40V [IBI2-40-200] Analytic Systems
Washdown / Pressure Pumps
Albin Group Water Pressure Pump – 12V – 5.3 GPM [02-02-008] Albin Group
NMEA Cables & Sensors
Man Overboard Devices
NMEA Cables & Sensors
Actisense Small Boat 8 Way Self-Contained Boat Network N2K [A2K-SBN-2] Actisense
Security Systems
Albin Group Boat Monitor System – 12/24V [01-07-008] Albin Group
Network Cables & Modules
Mobile Broadband
Accessories
Albin Group Marine Standard Electric Toilet Conversion Kit – 12V [07-66-019] Albin Group
Washdown / Pressure Pumps
Albin Group Wash Down Pump – 12V – 5.2 GPM [02-04-015] Albin Group
Man Overboard Devices
