PRO Shaft Seal 1-1/4″ Shaft & 2-1/4″ Tube
The PSS PRO Shaft Seal is a mechanical face seal utilizing our proven stainless steel and carbon sealing components but adds reinforced silicone bellows, a secondary shaft retention collar, 316 Stainless Steel hose clamps (rolled edges and non-perforated), and an optional Nitronic 50 rotor upgrade (for highly corrosive environments). Designed specifically for applications that will require increased durability and resistance to harsh, corrosive, high pressure, and otherwise demanding environments. The PSS PRO Shaft Seal is a specialized mechanical seal suitable for various applications, with unmatched performance.
As with PSS Type A & B Seals, The PRO Shaft Seal is a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to a heavy-duty silicone bellows attached to the vessel’s stern tube (shaft log), with 316SS hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange and is used to compress the bellows, the rotor is then secured to the shaft with set screws, and the shaft retention collar is installed. This compression (pre-load) maintains constant contact between the two mating faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable axial movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to “float” around the shaft and thus compensate for most misalignment and vibration from the drive-line. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the rotor’s bore. These O-rings rotate with the shaft and the stainless-steel rotor and therefore do not experience wear during operation.
Specifications:
- Temperature Limits: -13°F to 425°F (-25°C to 220°C)
- Pressure Limits: 40 PSI (2.75 BAR)
- Shaft RPM Limits: 10,000 RPM
- Carbon Graphite: Lapped to 4 HLB (0.000044″ tolerance)
- 316SS / Nitronic 50: Faced to 9 Ra
- Bellow Material: Molded formed silicone / fabric
Product Dimensions:
- Shaft Dia. (A) 1-1/4″
- Stern Tube Dia. (B) 2-1/4″ to 2-3/8″
- Uncompressed Length (C) 8.930″
- Approx. Compressed Length 8.180″
- Rotor Diameter (D) 2.875″
- Stern Cuff Length (E) 1.3″
Professionally packed and fast shipping
Through our long-term relationship with UPS, FedEx, DHL and many other top global carriers we are able to offer various shipping options. Our warehouse staff is extremely skilled and will package your products according to our exact and precise specifications. Your items are carefully inspected and properly secured before shipping. We ship to thousands customers every day across multiple countries. This shows our commitment to be the largest online retailer on the planet. We have distribution centers and warehouses in Europe and the USA.
It is important to note that orders with more than one item are processed according to the specific item.
We will thoroughly inspect all items before sending. Most orders are shipped within 48 hours. The time to deliver varies from 3-7 days.
Returns
The stock is dynamic and we do not fully manage it because of the fact that many parties are involved, including our warehouse and factory. The actual stock can change at any moment. It's possible that the inventory could run out once your order has been processed.
Our policy runs for a period of 30 days. We cannot replace or refund your purchase after 30 days since the purchase.
The item cannot be in use and must be in the original packaging. It should also be in the original package.
Related products
Transducers
Airmar B75H Bronze Chirp Thru Hull 0 Tilt – 600W – Requires Mix and Match Cable [B75C-0-H-MM] Airmar
Transducers
Airmar B75M Bronze Chirp Thru Hull 0 Tilt – 600W – Requires Mix and Match Cable [B75C-0-M-MM] Airmar
NMEA Cables & Sensors
Actisense Engine Management Unit Analog – NMEA2000 [EMU-1] Actisense
Battery Chargers
Transducers
Trim Tabs
Bennett Marine 24×9 Hydraulic Trim Tab System w/One Box Indication [249OBI] Bennett Marine
Transducers
Airmar B75H Bronze Chirp Thru Hull 12 600W – Requires Mix Match Cable [B75C-12-H-MM] Airmar
Transducers
Hot Water Heaters
Albin Group Marine Premium Square Water Heater 5.6 Gallon – 120V [08-01-028] Albin Group
Battery Chargers
Personal Locator Beacons
Trim Tabs
Bennett Marine 18×9 Hydraulic Trim Tab System w/One Box Indication [189OBI] Bennett Marine
Battery Chargers
