MSC 10 Marine Satellite Compass
KNOW EXACTLY WHERE YOU’RE HEADED
Get reliable, accurate heading information with the easy-to-install GPS-based MSC 10 marine satellite compass.
Features:
- Accuracy comes easy when you’ve got a multi-band GNSS receiver on board.
- Faster updates. More detailed tracking.
- Rough waters got you worried? MSC 10 delivers pitch, roll, and heave info, too.
- If other onboard systems need a heading sensor, we’ve got you covered.
MULTI-BAND GNSS AND MULTI-CONSTELLATION
The multi-band GNSS (L1 and L5 GPS) and multi-constellation (GPS, Galileo1, GLONASS, and BeiDou1) receiver deliver precise positioning2.
BOAT HEAVE AND MORE
Get reliable, accurate boat heave, pitch, and roll information — even in rough waters.
BUILT-IN ATTITUDE HEADING REFERENCE SYSTEM (AHRS)
With a fully integrated attitude and heading reference system for better GPS heading at all speeds, including pitching in rough seas, taking sharp turns, or standing still.
ACCURATE HEADING DATA
Multiple receivers deliver heading accuracy within 2 degrees. Because it uses satellite signals, you don’t have to worry about magnetic interference.
PRIMARY SENSOR ACROSS MULTIPLE SYSTEMS
You can use MSC 10 as the primary sensor for autopilots and other onboard systems that need accurate heading information.
NMEA 2000® NETWORK COMPATIBLE
Get heading, pitch, roll, and heave information delivered straight to your compatible Garmin chartplotter via the NMEA 2000 network.
EASY TO INSTALL
This compact device is simple to install and easily integrates into your Garmin marine ecosystem.
10 HZ UPDATE RATE
Get better, more detailed tracking information, thanks to the 10 Hz position update rate.
BACKUP HEADING SENSOR
In the extremely rare case that you lose a satellite signal, MSC 10 will seamlessly transition from GPS-based to magnetometer-based heading3.
What’s In The Box?
- MSC-10 Marine Satellite Compass
- Pole mount
- Mounting hardware
- NMEA 2000® backbone/drop cable (6 meters)
- NMEA 2000 T-connector
- Documentation
1 Supported when available
2 < 1 meter CEP, < 3 meters 95%
3 Magnetometer calibration required for backup magnetic heading support
Professionally packed and fast shipping
Through our long-term relationship with UPS, FedEx, DHL and many other top global carriers we are able to offer various shipping options. Our warehouse staff is extremely skilled and will package your products according to our exact and precise specifications. Your items are carefully inspected and properly secured before shipping. We ship to thousands customers every day across multiple countries. This shows our commitment to be the largest online retailer on the planet. We have distribution centers and warehouses in Europe and the USA.
It is important to note that orders with more than one item are processed according to the specific item.
We will thoroughly inspect all items before sending. Most orders are shipped within 48 hours. The time to deliver varies from 3-7 days.
Returns
The stock is dynamic and we do not fully manage it because of the fact that many parties are involved, including our warehouse and factory. The actual stock can change at any moment. It's possible that the inventory could run out once your order has been processed.
Our policy runs for a period of 30 days. We cannot replace or refund your purchase after 30 days since the purchase.
The item cannot be in use and must be in the original packaging. It should also be in the original package.
Related products
Transducers
Airmar B175H Bronze Thru Hull 12 Tilt – 1kW – Requires Mix and Match Cable [B175C-12-H-MM] Airmar
Battery Chargers
Analytic Systems AC Charger 1-Bank 100A 12V Out/110/220V In [BCA1550-12] Analytic Systems
Transducers
Airmar B765C-LH Bronze Chirp Transducer – Requires Mix and Match Cable [B765C-LH-MM] Airmar
Transducers
Transducers
Airmar B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug – 7-Pin – 0 [B164-0-HB] Airmar
Transducers
Airmar B175HW Bronze Thru Hull 12 Tilt – 1kW – Requires Mix and Match Cable [B175C-12-HW-MM] Airmar
Transducers
Airmar B175M Bronze Thru Hull 20 Tilt – 1kW – Requires Mix and Match Cable [B175C-20-M-MM] Airmar
Transducers
Airmar B175H Bronze Thru Hull 20 Tilt – 1kW – Requires Mix and Match Cable [B175C-20-H-MM] Airmar
Transducers
Airmar TM258 1kW Transom Mount Transducer w/Humminbird #9 Plug – 7-Pin [TM258-HB] Airmar
Transducers
Airmar TM185C-HW-MM CHIRP Transducer Transom Mount Needs Mix Match Cable [TM185C-HW-MM] Airmar
Transducers
Airmar TM260 1kW Transom Mount Transducer w/Humminbird #9 Plug – 7-Pin [TM260-HB] Airmar
Battery Chargers
